| This TeleVue two-part digital camera adapter allows you to attach a digital camera with 28mm filter threads on its lens to certain TeleVue eyepieces for "afocal" imaging through the eyepiece. Digital cameras with 28mm filter threads include, but are not limited to, the Nikon Coolpix 800, 900, 910, 950, 980, 995, and 4500. The adapter is designed for use with the following TeleVue eyepieces: 40mm and 32mm Plossls; 35mm and 27mm Panoptics; 22mm, 17mm, and 12mm Nagler type 4; 31mm Nagler type 5, and all TeleVue Radians. The long eye relief of these eyepieces most closely matches the internal pupil of the camera lens and the camera’s lens/imaging chip spacing. This minimizes vignetting. Shorter focal length or shorter eye relief TeleVue eyepieces, or other eyepiece brands, may not reach focus. Because the internal camera pupil will move as you zoom the camera lens in and out to adjust the magnification, you may find that the minimum vignetting occurs at the extremes of the zoom range. Your results will vary depending on the camera used. The adapter comes in two pieces. The ring-like piece can be used alone with all of the eyepieces mentioned above, except the Radians. Radians require both parts of the adapter be used. To use the adapter with all eyepieces except the Radians, the rubber eyecup is removed from the eyepiece body and the adapter installed in its place. Non-marring setscrews in the body of the adapter are tightened until they lock into the groove on the top of the eyepiece to hold the adapter securely in place. The male thread portion of the adapter is threaded into the female filter threads at the front of the digital camera lens and the eyepiece is slipped into the telescope focuser. The telescope is focused normally, observing the image sharpness on the LCD display screen of the camera. After imaging, the adapter and camera are removed from the eyepiece and the rubber eyeguard slipped back onto the eyepiece for visual use. A ridge on the inside of the rubber eyeguard fits into the groove on the top of the eyepiece to again hold the eyeguard in place. To use the adapter with a Radian eyepiece, the ring portion of the adapter is attached to the Radian eyepiece as described above. Because the Radian’s “Instadjust" variable eye relief feature might shift suddenly and change the focus (or worse) during an exposure, however, the eyepiece with its attached ring adapter must be inserted fully into the second, tube-like, portion of the adapter and the nylon thumbscrews on the tube tightened down on the Radian’s movable outer barrel to keep the “Instadjust" feature from extending inadvertently. The tube, eyepiece, and ring adapter are then inserted into the telescope and imaging done as described above. Because of the added diameter of the tube adapter, a digitally-adapted 1.25" Radian can only be used in a 2" focuser drawtube or diagonal.
|
Printer friendly version
Email page link to a friend
Do you have a question about this product?
