This 1.25” Astrodon Generation 2 Hydrogen-alpha imaging filter has a 5nm FWHM (F
idth at H
aximum transmission) passband centered on the H-alpha emission wavelength of 6563 Ångstroms. H-alpha transmission is guaranteed to be greater than 90% (typically 94-97%).
The filter rejects light outside of the desired H-alpha passband to a mere 0.0004% transmittance from 300nm to 1150 nm. This yields a very high signal to noise ratio and high contrast, even with a bright Moon nearby. In addition, the filter edges are blackened for high contrast.
The filter uses a 3mm (+/-0.05) thick striae-free fused silica substrate, rather than ordinary glass. The filter faces are polished flat to an accuracy of 1/4 wave (or better) and 30 arc second parallelism. For durability, the filter uses the hardest multiple layer dichroic sputtered coatings available. The filter comes in a hard plastic snap-lid storage case.
The Astrodon H-alpha filter is supplied in a 1.25” cell. It threads into any color filter wheel that accepts standard 1.25” filters. Unlike conventional filters that are assembled using a metal retaining ring in direct contact with the glass filter, this Astrodon filter uses a rubber O-ring between the filter holder’s retaining ring and the glass filter element. This gently cushions the filter in place, reducing the possibility of scratching or chipping the filter element from direct glass to metal contact.
Narrowband filters shift into the blue with very fast optical systems. This Astrodon filter is designed to have lower blue spectral shift with faster optics than a conventional filter. By placing the emission line at the left edge of the flat-topped passband when used with f/9 to f/10 and higher systems, any shift into the blue with a faster focal ratio simply moves the emission line towards the center of the passband. This keeps the desired transmission at a constant 90% or more, all the way down to an f/3 system.
The filter is parfocal with telescopes as fast as f/4 and is parfocal with all Astrodon LRGB, CRGB, OIII and SII filters. This eliminates the need to waste valuable observing time finding the correct focus when switching between filters in a filter wheel.
Unlike some other narrowband filters that use a sandwich design comprised of several pieces of glasses epoxied together, the single substrate design of the Astrodon H-alpha filter minimizes or eliminates internal reflection halos. Astrodon filters are renowned for not producing halos around stars and not leaking near-infrared light.
In addition to monochrome images of H-alpha emission features using this filter, many people use a combination of H-alpha, SII, and OIII filters for tri-color CCD imaging, rather than the traditional RGB filters. This allows them to emulate the amazing false-color Hubble Space Telescope images, such as the famous “Pillars of Creation." One of the feature images below (courtesy Astrodon Filters) shows the “Gulf of Mexico" area of the large North American emission nebula (NGC7000) near Cygnus. This was taken with an SBIG ST10XME on a Takahashi FSQ106N refractor using H-a, SII, and OIII filters. Green represents ionized hydrogen from the H-alpha filter. Red represents ionized sulfur from the SII filter. Blue represents ionized oxygen from the OIII filter. It is clear that the “Great Ridge" is strong in sulfur. Thus, narrowband filters can provide additional detail about the structure of emission nebula – not to mention striking images.