Product Description
This Celestron eyepiece holder/visual back is used to adapt the 2"/24 threads per inch rear cell on all Celestron Schmidt-Cassegrain telescopes for use with 1.25" accessories. This includes star diagonals, image-erecting prisms, straight through viewing with eyepieces, etc. This Celestron visual back is supplied as standard equipment with all Celestron 5", 8", 9.25" and 11" Schmidt-Cassegrains. It is available here as a replacement, should the original become damaged or lost.
Tech Details
Weight | 3 oz |
---|---|
Warranty | 2 years |
Reviews
Review by: David
This deserves its own review because it comes on many Celestron scopes, some replace it and some live with it with or without a bad word or two. It uses two screws and does not have a compression band. It is adequate for the stock diagonal and many EPs, but add a Barlow, heavy EP or a camera and you discover the limits. I bought and latter sold a Click-Lock and the attached C-11. The Click-Lock is very strong but the threads were not quite right for my C-11, but it was strong.
So what to do for my remaining SCTs? Instead of a new VB I drilled and tapped (with just a self tapping screw) for a nylon screw equidistant from the factory screws. Three screws makes it a useful VB, otherwise buy something with a compression band. (Posted on 10/23/2019)
So what to do for my remaining SCTs? Instead of a new VB I drilled and tapped (with just a self tapping screw) for a nylon screw equidistant from the factory screws. Three screws makes it a useful VB, otherwise buy something with a compression band. (Posted on 10/23/2019)