G-11 Equatorial Mount With Gemini II Go-to System, folding HD tripod

The inclusion of the new Losmandy Gemini II go-to hand-held high torque servo-based computer system turns the G11 into a full go-to computerized mount. The factory-installed Gemini II system includes an upgrade of the drive motors to higher torque versions that can support the high speed slewing of the go-to system.

The Losmandy Gemini II allows both stand-alone and PC-based control of the G-11 mount. The control electronics have the typical Losmandy hallmarks of being fully machined, anodized and brushed, with beautifully radiused edges that look like part of a Losmandy system, rather than a third party bolt-on. The new full-color graphic touch screen on the hand control clearly displays all functions. It has the classic four-button Gemini pattern for guiding, centering, moving, and slewing on both the touch screen and on a tactile four-button membrane on the rear of the hand control.

The new Gemini II feature set is comprehensive, making the system ideal for both casual observing and serious research. The system has been thoroughly tested in both Northern and Southern Hemispheres, and has been designed for precise and dependable use.

The heavy duty folding tripod allows the tripod head and legs to be stored and carried as a single unit, rather than the tripod head and three separate legs of the standard G-11 tripod, which must be assembled each time the mount is set up. This folding tripod version of the G-11 makes regular transport of the mount to a dark sky site and set-up easier than the standard non-folding tripod version, which may be more suited to a permanent observatory location.

EQUATORIAL HEAD SPECIFICATIONS

• Made of machined aluminum and stainless steel, black anodized.
• All stainless steel hardware.
• One 3.750" diameter needle thrust bearing.
• One 2.000" diameter needle thrust bearing.
• Two 1.500" diameter needle bearings.
• 5.625" diameter, 360 tooth, 7075 aluminum worm gear.
• Dual supported, ball bearing housed, stainless steel worm that has been heat treated and ground for precision and accuracy.
• Variable slip clutch, both axes. One knob design.
• 1.250" diameter stainless steel r. a. and dec shafts.
• Fully locking, unique tangent arm design altitude adjustment over a 14° to 64° range, with a large knob for easy alignment. (capable of operating over an 8° to 68° range with a small modification).
• Laser engraved latitude scale in 2° increments.
• Single knob azimuth control, bi-directional +/- 8.5°.
• 5.000" diameter laser engraved setting circles: right ascension divided in one hour increments, with 4 minute tic marks and a vernier reading to 1 minute; declination divided in 10° increments, with 1° tic marks and a vernier reading to 0.1°. Right ascension circle engraved for both Northern and Southern Hemisphere use.
• Porter slip ring design.
• 160 oz/in stepper motor, with 0.5 arc sec. steps.
• Industry-standard Losmandy "D-plate" dovetail saddle-plate allows for the interchanging of any tube assembly and reduces the need for declination weights.
• Removable stainless steel weight shaft with safety knob.
• One 21 lb counterweight is standard.
• 7 lb and 11 lb extra counterweights available.
• An optional through-the-axis polar scope works in Northern and Southern Hemispheres.
• Instrument payload capacity 60 lbs (100 pound payload of instruments and counterweights combined).
• Equatorial head weight 36 lbs.

TRIPOD SPECIFICATIONS:

• All machined aluminum, black anodized, powder coated.
• Tripod height adjustable from 33" to 48". All heights are to top of tripod. Add 10" at 34° degrees latitude to the center of the declination/right ascension junction. Add 7" from the declination/right ascension junction to the top of saddle. A single large locking lever of each leg allows the legs to fold down, as shown in the feature image below. The #FHD-MA carries up to 425 lbs., but weighs only 45 lbs. itself.

DUAL-AXIS ELECTRONICS SPECIFICATIONS:

• Diamond push button pattern.
• Right ascension and declination reversing switches.
• Three guiding rates; 30%, 50% and 2x the sidereal rate.
• Three setting rates; 4x, 8x, and 16x the sidereal rate.
• Quartz tracking rates: sidereal, solar, lunar, King.
• Periodic Error Correction (PEC).
• Programmable declination backlash compensation (TVC).
• Control panel dimmer.
• Accepts auto-guider systems.
• Northern and Southern Hemisphere operation.
• 12 volt DC - 500ma power use.
• Tiltable control panel for easy access.
• Small hand control box for comfortable use.

GEMINI II GO-TO SYSTEM

DC Servo Motor Details

• The upgraded DC servo motors on this go-to mount have higher torque through their entire range of tracking and slewing speeds than the standard G11 mount. The drive system has a dual 12~18V DC input/output and draws 3.0A maximum.
• A full-color graphic touch screen on the hand control of the stand-alone Gemini II system clearly displays all functions. There is a classic four-button diamond pattern for guiding, centering, moving, and slewing on both the touch screen and on a tactile four-button membrane on the rear. There is also support for the original Gemini four-button controller.
• The Gemini II has 0.5 arc second positioning accuracy during go-to operation. It is GPS-compatible with an optional receiver. It has Ethernet 10/100 with full IP function to permit operation from anywhere using a browser, ASCOM, or an application over the web or serial port.
• The more than 40,000 object memory of the Gemini II is non-volatile and the system contains a real-time clock. You can select from English, French, and German language displays. There are two USB ports; one for virtual COM to PC, and one for an ASCOM or planetarium program. There is PEC correction built in and an auto-guider port. The firmware can be upgraded via the internet.