Takahashi 4 Turret 1.25" Eyepiece Holder

Be the first to review this product

$640.00

Availability: More on the way

Looking for a quick way to change magnifications and not use a zoom eyepiece?  This great accessory from Takahashi might be the ticket.
Our Product #: TAKTUR4
Takahashi Product #: TKA00404
 

Product Description

A night of observing is a wonderful experience.  The only drawback you might have is that you have way too many eyepieces you want to use and tire of continuing to go back and forth into your eyepiece bag.  The Takahashi turret could be your answer.

The turret has the ability to safely hold four 1.25" eyepieces for basically any observing needs you might have.  The turret act like a standard 90° star diagonal so your viewing position remains unchanged as you switch between eyepieces.  The Takahashi turret has a click-stop design with an eyepiece indicator mark so you can not only feel, but see when each eyepiece is seated properly.  The eyepieces are held in the turret by means of non-marring compression rings. A twist-ring adjusts the tightness of the compression ring, rather than a thumbscrew. Metal plugs seal four 1.25" eyepiece holders when the turret diagonal is not in use. 

The turret has a 2" nosepiece with safety groove that slips into the 2" focuser drawtube of your refractor or Cassegrain telescope.  If you have a Schmidt-Cassegrain, however, you will need to purchase an SCT to 2" eyepiece adapter as the turret will not simply thread onto your rear cell.

The turret takes up a rather small 81mm of backfocus, so most scopes should be able to work without issue.  However, some Takahashi scopes will require an optional extension tube to achieve focus.  The ones that will need it are listed below.

FC-76S

FSQ-85

FSQ-106ED

FSQ-130ED

Mewlon-250CRS

Mewlon-300 CRS

Tech Details

Reviews

How do you rate this product? *
Rating