These 145mm internal diameter Parallax split tube rings fit the Takahashi FS-128 refractor optical tube. The rings are made of die-cast aluminum and are hinged for easy telescope installation and removal. Their hinges and no-tool knobs and hardware are made of stainless steel for long life. The rings are finished in gloss black paint and are felt lined.
The rings are supplied with three 1/4”-20 thread mounting holes drilled and tapped in the flat boss on the bottom of each ring (the center hole is positioned equidistant between two holes on 3.5” centers). These allow you to install the rings on a variety of equatorial mount dovetail plates.
The center hole is used to install the rings on the narrow dovetail of a Vixen Great Polaris or Sphinx, Celestron Advanced Series, Meade LXD-75, or similar mount. While these mounts can hold the 16.5 pound weight of the FS-128 optical tube, the 3.25 pound rings, and the added weight of other basic visual accessories, be certain that the payload capacity of your mount is sufficient to hold that weight plus the weight of any additional photographic accessories you might want to add.
The center hole is also used to mount the rings on a generic dovetail plate, such as one of the Losmandy universal dovetail plates (#DUP and #DUPS), that have only a series of holes drilled along the centerline of the dovetail. The two 1/4”-20 thread holes drilled on 3.5” centers are used for mounting the rings on 4” wide telescope-specific Losmandy dovetail plates (such as the #DAP67, #DC8, etc.) or any other 4” wide dovetail that has mounting holes on 3.5” centers, or can be drilled to those specifications. Three similar holes are drilled and tapped on the top boss of each ring to allow the attachment of accessories, such as a piggyback ball-head camera mount or a Losmandy D-plate.
If you are buying these rings to mount the optical tube on an Astro-Physics dovetail and mount, please specify so at the time you order. The rings will be drilled at the factory with the Astro-Physics hole spacing on 3.2” centers, instead of the 3.5” three-hole pattern described above.
Should the standard three-hole mounting configuration (or the alternative Astro-Physics pattern) described above not fit your dovetail plate, custom mounting holes can be drilled in blank rings at the Parallax factory to fit your mounting requirements. Specify the number, size, thread pitch, and spacing of the custom mounting holes needed when ordering your rings. Astro-Physics spacing or custom mounting hole drilling requires an additional $15 charge.
We haven't recommended any accessories for this product quite yet... check back soon or call one of our experts (1-405-364-0858).
This product does not have supplied accessories... or supplied accessories have not been assigned.