Tele Vue adapter to use Dioptrx lenses with 19mm and 24mm Panoptic and 20mm Type 5 Nagler eyepieces

Be the first to review this product


Availability: More on the way

This adapter lets you use a Dioptrx astigmatism-correcting lens with a TeleVue 19mm or 24mm Panoptic eyepiece or a 20mm Type 5 Nagler . . .
Our Product #: DEA0001
TeleVue Product #: DEA-0001

Product Description

This adapter converts small eyeguard TeleVue 19mm and 24mm Panoptic and 20mm Type 5 Nagler eyepieces to a larger eyeguard design. This allows these eyepieces to be used with TeleVue Dioptrx astigmatism-correcting lenses. These eyepieces have shorter eye relief than the other TeleVue eyepieces recommended for use with the Dioptrx system, so to minimize any vignetting, it's best to use these eyepieces for deep-sky applications where your eye pupil is large.

The small eyeguard is removed from the eyepiece and the metal adapter ring is firmly attached to the top of the eyepiece. A supplied hex wrench lets you tighten the setscrew in the side of the adapter ring into the groove at the top of the eyepiece that held the rubber eyeguard in place. Once the adapter ring is installed, the new larger supplied rubber eyeguard is slipped onto the adapter ring, or a Dioptrx lens is first attached to the adapter ring and the rubber eyeguard is in turn slipped onto the Dioptrx lens.

When used with binoviewers, you may encounter "nose relief" limitations because the Dioptrx lenses reduce the normal eyepiece eye relief by an amount equal to the depth of the Dioptrx lens.

Tech Details

Weight 1.5 oz.
Warranty 5 years


How do you rate this product? *